fadia Home&Design

By Alexa Lee
Bedroom is the most important and sacred place in a house. It is the place where everyone retreat to have a good night rest and sleep. It should be peaceful,comforting and relaxing. Your feng shui bedroom should place much emphasis on the design structure of the bedroom as well as the decorations in the bedroom. Therefore it is very important to have a good feng shui bedroom that encourages good chi, otherwise you will create unnecessary problems affecting your daily life.
Here are 5 tips to have a good feng shui bedroom :

• Avoid having a window behind your bed

Proper planning is essential in deciding your feng shui bedroom. A window behind a bed signifies a bad feng shui bedroom. This arrangement makes a sleeping person vulnerable to yin spirit formation. Common sense comes into play again. Cold air from the night affects a person s sleep and this in turn make a person grumpy and snappy.

• Use calm, soothing warm colors for your feng shui bedroom

A good feng shui bedroom uses soft pastels in shades of beige, green, blue and yellow which are are ideal for a tranquil and peaceful sleep. Stay away from bright colours such as red or orange as they will keep you from enjoying deep sleep.

• Never put any living plants or aquariums in your feng shui bedroom

Common sense does play a part in designing your feng shui bedroom. Flowers will compete with you for oxygen during the night and water from the fish tanks can cause moisture and dampness to your bedroom furniture. Your plants and aquariums should be placed outside the bedroom to prevent you from having health and wealth problems.

• Keep your feng shui bedroom neat and airy

Open up the windows in your bedroom during the day.
You should also ensure that your bedroom is free of clutter and well maintained. This is part of a good feng shui bedroom habit which will help to dispel stagnant chi that may cause health and money related problems.

• Avoid having exposed overhead beams over your bed

Exposed overhead beams represent knives cutting across the bed, sending sha chi or killing energy to the sleeping person. Exposed overhead beams represent a harmful and hazardous feng shui bedroom as it will cause family disharmony and incessant quarrels. The effect will be more potent if the overhead beams are structural.

You should implement these few simple feng shui bedroom tips to your bedroom and you will start to see small significant improvement over your life almost immediately. The 5 feng shui bedroom tips are only a small part of a larger collection of feng shui bedroom tips, to read more go to http://www.resourcesecrets.com/fengshui-bedroom.htm

Connection
Connect the supply pipe to the mains supply taking care to insert a stop valve. It is possible to connect to hot water up to 65C.
Important : Do not connect dishwasher to an inlet-controlled water heater. Connect the waste pipe to a siphon taking account of the bend.

Dishwasher with total safety system
To guarantee the efficiency of the total safety system, it must be installed in such a way that any leak in the bottom of the appliance can be detected. The waste pipe can be extended up to 5 m.
In the housing, the supply pipe and waste pipe must be separate. The housing can be placed in any direction and can be placed on the ground for easier installation.

Safety systems

1. Anti overflow safety system which prevents the water level from getting too high in the tank, for example if the water supply valve stays open = over flow discharge
2. Anti leakage safety system which protects against leak from below the appliance, for example from a weak joint or hole in a pipe = water supply disconnection and start of emptying system.
3. Anti burst safety system which protects against water leaks in the supply pipework = mechanical disconnection of the water coming from the tap.
4. Protection against the fall of drainage pipe : high point of the drainage pipe avoiding siphoning.
5. Protection against the return of wastewater : air break in compliance with European Standards.

The Aquablock “Plus” toatal safety system includes safety system 1 + 2 + 3 : Electronically disconnection of the water supply from the tap, electronically disconnection of the valve and drainage of the water from the dishwasher.

Installing Dishwashers
Assembly of the decorative door :
It must have a width of : 592 mm for the 60 cm dishwasher and a minimum thickness of 19 mm.
Adjusting the control panel :
By using the set of spacers ( 5 mm ) the control panel for all models to be fitted is adjustable between a heigh of 107 mm minimum and 187 mm maximum.
Fast and easy installation of the cabinet ( on the 60 cm built-in models )
First of all, fix the alignment guides on the dish washing machine. Following the instructions in the assembly guide, screw the 2 clips to the interior of the wooden door. Remove the 4 lateral screws in parallel from the double door of the dish washing machine.
Clip this door onto the wooden door on the front of the dish washing machine and adjust it.
Finally after adjusting, secure the wooden door with 4 news screws ( longer screws supplied in the instructions pocket )
Assembling the base board :
It is possible to install a continuous baseboard, possibly with a cutout, according to the type of decorative door used. A separate base board can be fixed onto the dishwasher usind deep adjustbale angle brackets. The depth of the base board can be aligned with the adjacent base boards.
Adjusting the feet supports :
The height of the dishwasher can be adjusted up to 880 mm, according to the height of the working surface : the back feet are adjusted through  the front of the appliance.
Important : the plastic slippers underneath the feet are essential as they make it easier to position the dish washing machine when the floor is uneven. Leave them in place after the machine has been installed.

There are some kind of door hardware need to be installed even in the floor for the floor hinges, in the glass door itself and also in the opening frame. The floor hinges and patch fitting act as pivot, they working together in order to open and close. It will be automatically closed when it being open not more than 80 degree or it will be stop ( opened ) at 90 degree.

This is the hardware code from Dorma product, you can find it in their website, also the information about glass template to fixed up the patch fitting.
There are the kind of hardware for the common used :

• Floor Hinges : BTS-75, BTS-80 + cover plate
• Patch Fitting : PT20, PT10, PT21, PT24, PT30, PT40, PT41 L/R
• Lockset : US10 + cylinder
• Pull Handle : variable

If you want to install the 10-12mm frame less glass, you have to determine first about the Opening. The Opening with Wood, Brick, Marble or met with another glass have a difference patch-fitting. As describe at the picture below :

Note :

• Wood/Marble Framed : PT21
• Alumunium Framed : PT24
• Glass at Above : PT30
• Glass at Side and Above : PT40
• Glass at Side and Above with Rib Glass : PT41R/L

The Rib Glass :
The meaning is the the same with it named as a rib, it usefull for fixed the high frameless curtain wall. If another patch fitting only have 2D (XY) form, it have 3D (XYZ) form.